Highly flexible

Basic external venetian blinds can be individually planned and are easy to integrate into any facade: Thanks to the variable configuration of the individual components, basic external venetian blinds are suited to almost any construction project.

Application-specific

Different external venetian blind slats can be used according to your individual needs: From stack-optimised beaded slats in a classic design and flat slats for a lower slat stack height to dim-out slats to perfectly darken your room.

Classic

Securely guided: The rail guidance is the classic among the guidance versions. The reliable lateral guidance provides great stability in windy conditions, good noise reduction, and a low-wear movement of the slats across the guide pins.

  • High wind stability
  • Low wear run
  • Good noise reduction
Types of drive Motor Crank
1 Top rail (tilt rod, bearing)
2 Slats
3 Tilting tape, lifting tape
4 Lateral guidance
5 End rail
5000 mm 5000 mm 25 m²

The WMS Wall-mounted transmitter basic is a 1-channel control for wireless operation of up to 10 WMS receivers of the same product type.

WMS WebControl pro is hardware for integrating a mobile end device into the WMS radio system as an additional transmitter. It can be operated via app or web browser.

In addition to brightness and wind speed, the 230 V AC supplied WMS weather station plus also records precipitation or ice formation and provides this information to the WMS radio network.

  • Can be used in different ways with almost all slat geometries

  • Increased wind speed limits
  • Versatile applications

  • Early warning system unobtrusively attached to the end rail
  • Sensor system tuned to WAREMA external venetian blinds
  • Self-sufficient with integrated power supply

  • Ergonomic lighting design for increased well-being
  • Compliance with legal standards
  • Reduction in energy costs for artificial lighting

  • External venetian blind slats move in the open position
  • A possible dim-out of the room during the movement is prevented

  • Approx. 1/3 tilting speed
  • No effect on the speed of the movement
  • Model with standard motors

  • Ideal for use in buildings with two emergency routes
  • Opening speed in case of emergency approx. 33 seconds (for blind height 2200 mm)

  • Motor with additional collapsible crank
  • Operating option in the case of motor failure

  • Use of solar energy via solar panel, incl. solar-powered control system and storage battery
  • Practical solution for retrofitting sun shading systems

  • Incidence of daylight also when slats are closed
  • Line of sight to the outside remains
  • Also possible for only part of the slats

  • Additional manual opening for motor-operated external venetian blinds
  • Ideal for the second emergency route
  • Alternative to the motor with connection for additional crank operation

  • Also available for middle rails
  • Also available without sun shading system as VisioNeo Single
  • Suitable solution available as a railing system for balconies

  • In the event of a power failure, the emergency retraction can either be triggered manually using an emergency push button or automatically via sensors.

Emergency power supply kit for automatic raising of sun shading products in the event of a power failure