Integrable

Make the most of on-site conditions: external shaft venetian blinds are suitable for installation in on-site shafts or lintel boxes. Optically unobtrusive integration into the facade for new build or renovation projects.

Stable

For particularly wide surfaces: Stable system with auxiliary cover panels closed on both sides reinforces the top rail.

Premounted

High degree of premounting: The sophisticated design, with a premounted slat stack, reduces the installation time.

  • Simple installation
  • Optimal for insulated shafts
Types of drive Motor
1 Auxiliary cover panel
2 Slats
3 Tilting and lifting tape
4 Lateral guidance
5 End rail
4000 mm 4000 mm 16 m²

WMS WebControl pro is hardware for integrating a mobile end device into the WMS radio system as an additional transmitter. It can be operated via app or web browser.

The WMS Hand-held transmitter basic is a 1-channel control for wireless operation of up to 10 WMS receivers of the same product type.

  • Ergonomic lighting design for increased well-being
  • Compliance with legal standards
  • Reduction in energy costs for artificial lighting

  • External venetian blind slats move in the open position
  • A possible dim-out of the room during the movement is prevented

  • Approx. 1/3 tilting speed
  • No effect on the speed of the movement
  • Model with standard motors

  • Ideal for use in buildings with two emergency routes
  • Opening speed in case of emergency approx. 33 seconds (for blind height 2200 mm)

  • Incidence of daylight also when slats are closed
  • Line of sight to the outside remains
  • Also possible for only part of the slats

  • Sun shading systems and integrated insect screens from a single source
  • Ideally ventilate living areas without annoying insects
  • Aluminium parts match the colour of the sun shading system

  • Additional manual opening for motor-operated external venetian blinds
  • Ideal for the second emergency route
  • Alternative to the motor with connection for additional crank operation

Emergency power supply kit for automatic raising of sun shading products in the event of a power failure

  • In the event of a power failure, the emergency retraction can either be triggered manually using an emergency push button or automatically via sensors.