Integrable

Make the most of on-site conditions: shaft systems are suitable for installation in on-site shafts or lintel boxes. Optically unobtrusive integration into the facade for new build or renovation projects.

Flexibly installed

Adaptable: depending on the situation, shaft roller shutters can be installed in shafts that are open to the bottom or in the standard existing on-site lintel boxes that have an internal or external inspection access. The degree of premounting, adapted to the space available on-site, can be specified when ordering.

Easily mounted

No separate fixing of consoles in the structure required: the roller shutter system is attached to the guide rails above the bearing consoles. The guide rails are screw-fixed to the window or in the reveal.

  • Installation in existing boxes/shafts on-site
  • Unobtrusive integration in the building design
  • Independent installation of roller shutters and windows
Types of drive Motor Crank Belt
1 Bearing
2 Shaft
3 Pressure springs 2-piece
4 Roller shutter curtain
5 Lateral guidance
6 End rail
3800 mm 3500 mm 10 m²

The WMS Wall-mounted transmitter basic is a 1-channel control for wireless operation of up to 10 WMS receivers of the same product type.

WMS WebControl pro is hardware for integrating a mobile end device into the WMS radio system as an additional transmitter. It can be operated via app or web browser.

The WMS Photo sensor detects brightness and dawn/dusk and transfers this data to the WMS radio network.

  • Use of solar energy via solar panel, incl. solar-powered control system and storage battery
  • Practical solution for retrofitting sun shading systems

  • Railing system for floor-to-ceiling windows with different fillings
  • The brackets for the fillings are integrated in the sun shading product
  • The filling is positioned behind the sun shading system