The WMS Plug receiver power is a receiver for controlling lighting (e.g. LEDs) and high loads (e.g. radiant heaters), plugged into a STAK 3 / STAS 3 connection.

Plugged in between for accessories

No additional line routing: plug receiver is plugged in directly between the Hirschmann plug-and-socket connection on the 230 V power consumer. Suitable for high loads such as radiant heaters.

Bidirectional

Wide operating range and functional safety: the mesh network passes commands on from receiver to receiver – even to sun shading products further afield. The transmitter receives feedback on the executed function.

Reliable

Individual control of sun shading system or lighting: settings and parameters are saved directly in the receiver. These reliably control the sun shading system or other power consumers.

  • Simple and cost-efficient retrofitting of a remote control option for WAREMA radiant heaters
  • All settings and parameters of the automatic functions are stored directly in the plug receiver
  • Receives commands/weather data and forwards them
  • Reports executed commands to the WMS Transmitter by means of an optical signal
Article number: 2007454

Description

Value

Operating voltage

85-265 V AC

Frequency

50-60 Hz

Output

230 V AC

Switching capacity per drive

max. 2300 VA

Transmission frequency

2,4 GHz

Degree of protection

IP 54

Safety class

I

Type of installation

Pluggable

Width

136 mm

Height

33 mm

Depth

38 mm

Mounting housing for WAREMA plug receiver

Mounting housing for WAREMA plug receiver

Mounting housing for WAREMA plug receiver