Up to four 24 V DC sun shading drives can be controlled separately with the Omnexo 24 V DC actuator.

Automated

WAREMA control systems create your perfect feel-good climate at any time of day. With the smart control systems, your sun shading products move to the desired position automatically.

Comprehensive

Our solutions combine numerous control options and many functional components. This gives you flexibility in all areas and all of your requirements are met.

Suitable

You get the right control solution for every requirement.

  • Actuation of up to four 24 V sun shading drives with pole changer switching
  • Required connecting lines:
    • 24 V connecting line for supplying the actuator and the connected 24 V drives
    • 4-wire bus cable
  • Connection of conventional push buttons for local individual and group operation (24 V)
  • Locking contacts to disable the drive (e.g. when windows are open)
  • Operating mode of local push buttons is automatically adjusted to the set product types
  • WAREMA's own Simplified-Speedscan procedure transmits serial numbers to the central control unit
Article number: 2062710

Description

Value

Operating voltage

24 V DC

Output

4 x 24 V DC

Switching capacity per drive

60 W at 24 V DC

Degree of protection

IP 20

Safety class

III

Type of installation

DIN rail-mounted (REG)

Subassembly width

6 MW

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads