Up to four sun shading drives or power consumers can be controlled separately via floating switching outputs with the Omnexo floating actuator.

Automated

WAREMA control systems create your perfect feel-good climate at any time of day. With the smart control systems, your sun shading products move to the desired position automatically.

Comprehensive

Our solutions combine numerous control options and many functional components. This gives you flexibility in all areas and all of your requirements are met.

Suitable

You get the right control solution for every requirement.

  • Control of sun shading drives and power consumers (e.g. lighting) via 4 floating switching outputs
  • Required connecting lines:
    • 230 V connecting line for supplying the connected 230 V sun shading drives/power consumers or 24 V connecting line for supplying the connected 24 V sun shading drives/power consumers (note terminal set)
    • REG actuator: 24 V connecting line from external power supply unit for supplying the actuator
    • AP actuator: 230 V connecting line for supplying the actuator
    • 4-wire bus cable
  • Connection of conventional push buttons for local individual and group operation (24 V)
  • Locking contacts to disable the drive (e.g. when windows are open)
  • The operating mode of the connected local push buttons is automatically adjusted to the set product types

  • WAREMA's own Simplified-Speedscan procedure transmits serial numbers to the central control unit

Article number: 2061354

Description

Value

Operating voltage

230 V AC

Frequency

50 Hz

Output

4 x floating

Switching capacity per drive

500 VA with 230 V AC

Degree of protection

IP 30

Safety class

I

Type of installation

Surface-mounted (AP)

Width

158 mm

Height

180 mm

Depth

60 mm

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads