Up to four sun shading drives or power consumers can be controlled separately via floating switching outputs with the Omnexo floating actuator.

Universally usable

Omnexo floating actuators control up to four floating switching outputs. The outputs can be programmed freely.

Flexible

Omnexo switch actuators are available for different installation situations: The actuators are available in a compact design for surface mounting and DIN rail mounting in electrical cabinets.

Simple

Straightforward handling: The entire system is designed for especially easy installation, comfortable set-up and operation.

  • Control of sun shading drives and power consumers (e.g. lighting) via 4 floating switching outputs
  • Required connecting lines:
    • 230 V connecting line for supplying the connected 230 V sun shading drives/power consumers or 24 V connecting line for supplying the connected 24 V sun shading drives/power consumers (note terminal set)
    • REG actuator: 24 V connecting line from external power supply unit for supplying the actuator
    • AP actuator: 230 V connecting line for supplying the actuator
    • 4-wire bus cable
  • Connection of conventional push buttons for local individual and group operation (24 V)
  • Locking contacts to disable the drive (e.g. when windows are open)
  • The operating mode of the connected local push buttons is automatically adjusted to the set product types

  • WAREMA's own Simplified-Speedscan procedure transmits serial numbers to the central control unit

Article number: 2061353

Description

Value

Operating voltage

24 V DC

Output

4 x floating

Switching capacity per drive

500 VA with 230 V AC

Degree of protection

IP 20

Safety class

II

Type of installation

DIN rail-mounted (REG)

Subassembly width

6 MW

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads