Flexibly adjustable

Opaque from the outside but with a view out from the inside: The external sun shading system consisting of connected horizontal slats combines thermal protection, glare control, and visual privacy with an adjustable view out.

Universal

Ideal for new buildings, retrofits and renovations: Installed in front of the window, this system suits any design of building – unobtrusively embedded in plaster or with a visible box as a design element.

Saves space

Ideal for conventional window and door heights in residential buildings: The box with special storage of the slat stack ensures a compact housing of the external venetian blind stack in front of the window, and brings as much light as possible into the room.

Pre-assembled

Front-mounted systems in a compact design: The box with the slat stack already premounted is placed on the guide rails and mounted in front of the window as one unit.

Uniform appearance

Cross-system combinations: The front-mounted models of external venetian blinds, roller shutters and window awnings feature boxes that look the same or similar. When combined, they create a harmonious facade appearance with sun shading systems that are matched to the particular use of the room.

  • Extruded external venetian blind box
  • energy efficient: no thermal bridges (due to the box being seated IN FRONT OF the window)
  • normal box depth
Types of drive Basic motor for external venetian blinds Motor
1 Box
2 Inspection cover
3 Slats (Zetra dim-out slat 80 Z)
4 Loop cord, lifting tape
5 Lateral guidance
6 End rail
4000 mm 4000 mm 16 m²

1-channel wall-mounted transmitter for wireless operation of WMS receivers

Hardware for integrating a mobile end device into the WMS as an additional transmitter. Operation by app or web browser

  • Also available for middle rails
  • Also available without sun shading as VisioNeo Single
  • Suitable solution available as a railing system for balconies

  • Early warning system unobtrusively attached to the end rail
  • Sensor system tuned to WAREMA external venetian blinds
  • Self-sufficient with integrated power supply

  • Ergonomic lighting design for increased well-being
  • Compliance with legal standards
  • Reduction in energy costs for artificial lighting

  • Approx. 1/3 tilting speed
  • No effect on the speed of the movement
  • Model with standard motors

  • Optimum insulation of cover panels and boxes
  • Thermal bridges in lintel area are prevented
  • Insulation behind and on the cover panel/box possible

  • Ideal for use in buildings with two emergency routes
  • Opening speed in case of emergency approx. 33 seconds (for blind height 2200 mm)

  • Use of solar energy via solar panel, incl. solar-powered control system and storage battery
  • Practical solution for retrofitting sun shading systems

  • Incidence of daylight also when slats are closed
  • Line of sight to the outside remains
  • Also possible for only part of the slats

  • Additional manual opening for motor-operated external venetian blinds
  • Ideal for the second emergency route
  • Alternative to the motor with connection for additional crank operation

Emergency power supply kit for automatic raising of sun shading products in the event of a power failure

  • In the event of a power failure, the emergency retraction can either be triggered manually using an emergency push button or automatically via sensors.