Flexibly adjustable

Opaque from the outside but with a view out from the inside: The external sun shading system consisting of connected horizontal slats combines thermal protection, glare control, and visual privacy with an adjustable view out.

Widely applicable

Universal system: To be used for transom and mullion facades, conservatories, retrofitting on insulated facades, or renovations.

Broad selection of variants

Visible in front of the facade: To perfect your design, we have a wide range of cover panel variants and types of guide rails for selection.

Well fixed

The cover panel is installed as a self-supporting model using the guide rails: It is mounted either on or between the guide rails and does not require a separate connection to the structure.

Quick installation

Time-saving premounting: Cover panel brackets and external venetian blind brackets are premounted in the cover panel at the factory. The cover panel consoles and the guide rail brackets are also premounted on the guide rails.

  • No fixation of the cover panel to the facade is required
Types of drive Motor
1 Cover panel
2 Slats
3 Tilting tape, lifting tape
4 Lateral guidance
5 End rail
4000 mm 5000 mm 13 m²

Hardware for integrating a mobile end device into the WMS as an additional transmitter. Operation by app or web browser

1-channel Hand-held transmitter for wireless operation of WMS receivers

Solar-powered weather station for measuring weather data and supplying it to the WMS network

  • Increased wind speed limits
  • Versatile applications

  • Early warning system unobtrusively attached to the end rail
  • Sensor system tuned to WAREMA external venetian blinds
  • Self-sufficient with integrated power supply

  • Ergonomic lighting design for increased well-being
  • Compliance with legal standards
  • Reduction in energy costs for artificial lighting

  • External venetian blind slats move in the open position
  • A possible dim-out of the room during the movement is prevented

  • Approx. 1/3 tilting speed
  • No effect on the speed of the movement
  • Model with standard motors

  • Ideal for use in buildings with two emergency routes
  • Opening speed in case of emergency approx. 33 seconds (for blind height 2200 mm)

  • Incidence of daylight also when slats are closed
  • Line of sight to the outside remains
  • Also possible for only part of the slats

Emergency power supply kit for automatic raising of sun shading products in the event of a power failure

  • In the event of a power failure, the emergency retraction can either be triggered manually using an emergency push button or automatically via sensors.